Hyte Y50 RGB MId-Tower Gaming Cabinet - Black Cherry

Key features

• Three-piece panoramic tempered glass side and front panels
• Pre-installed 360mm reverse-blade ARGB side fan and 120mm ARGB rear fan
• Native rear-connect support for Asus BTF, Gigabyte Stealth, and MSI Project Zero motherboards
• Also supports traditional E-ATX, ATX, mATX, and ITX motherboards
• Nine total fan mounts across top, side, rear, and bottom for air or liquid cooling
• Front-panel I/O with USB-C 10Gbps and dual USB-A 5Gbps ports
• Supports graphics cards up to 360mm long and 170mm wide
• Available in five case colour finishes

Understand This Product — TechCureIndia

What it does

This is a mid-tower PC case that houses and cools a desktop build's motherboard, graphics card, power supply, storage, and fans/radiators behind tempered glass panels.

What the key specifications mean

• Motherboard Support: Confirms the case fits standard E-ATX/ATX/mATX/ITX boards and also natively routes cables for rear-connect boards like Asus BTF, Gigabyte Stealth, and MSI Project Zero without extra cable kits.
• Power Supply: An ATX PSU up to 250mm long fits normally; with a rear-connect motherboard, PSU length is limited to 225mm.
• Video Card Max Dimensions: Graphics cards up to 360mm long and 170mm wide fit horizontally, covering most high-end consumer GPUs.
• Top/Side/Rear/Bottom Fan & Radiator Support: Details how many fans or how large a radiator can be mounted in each case zone, which determines custom or AIO liquid cooling options.
• Included Fans: Buyers get one 360mm reverse-blade ARGB fan at the side and one 120mm ARGB fan at the rear pre-installed, reducing initial build cost.
• Fan LED Count & Speed: Each fan blade carries 8 ARGB LEDs and fans run between 200–1500 RPM, giving a range from quiet to high-airflow operation.
• CPU Cooler Height: Air coolers up to 160mm tall will fit without clearance issues.
• Internal Drive Bays: Up to 6x 2.5” drives (4 of which share space with 3.5” bays) and 2x dedicated 3.5” bays support SSD and HDD storage.
• Expansion Slots: 7 full-size slots allow for multi-card or add-in card setups.
• Front USB-A / USB-C: Front panel offers 2x USB-A (5 Gbps) and 1x USB-C (10 Gbps) for fast external device and storage connections.
• Case Dimensions & Volume: At 473 x 288 x 461mm and 63.8 litres, it is a standard-footprint mid-tower that fits typical desk or floor placements.

Practical benefits

• Reduces post-purchase fan purchases with two pre-installed ARGB fans
• Simplifies cable management for rear-connect motherboard owners
• Flexible cooling layout supports both air and custom liquid cooling
• Fast front I/O speeds up SSD/peripheral transfers
• Tempered glass panels showcase the build from multiple angles

Who it suits

• Gamers building a visually styled ARGB system
• Builders using rear-connect motherboards (Asus BTF, Gigabyte Stealth, MSI Project Zero)
• Users planning custom liquid-cooling loops with large radiators
• Content creators needing room for full-size GPUs and capture cards

Compatibility and installation

• Motherboard must be E-ATX, ATX, mATX, ITX, or a supported rear-connect ATX board (Asus BTF, Gigabyte Stealth, MSI Project Zero)
• PSU must be ATX form factor and within the stated length limits
• GPU must not exceed 360mm length and 170mm width
• CPU air cooler must be 160mm tall or shorter
• Case footprint of 473mm (L) x 288mm (W) x 461mm (H), 63.8 L internal volume
• Requires adequate space for top, side, and bottom fan/radiator mounting as per supported sizes
• Front I/O includes combo audio/mic jack, 2x USB-A, and 1x USB-C
• Pre-installed fans run at 200–1500 RPM and include ARGB lighting requiring a compatible ARGB header/controller

Important limitations

• Rear-connect PSU length is reduced to 225mm versus 250mm for traditional boards
• Rear fan/radiator support is limited to a single 120mm fan or radiator
• Internal 2.5” and 3.5” bay counts overlap (4 of the 6 2.5” slots share space with 3.5” bays)

Package contents

• Specification verification required.

Buy separately:

• Motherboard, CPU, GPU, RAM, storage, and power supply must be purchased separately
• Additional fans or radiators beyond the included two fans, if desired
• ARGB/fan controller or motherboard header cabling, if not already present on the motherboard

Check before you buy

• Confirm motherboard type (traditional vs rear-connect) before purchase to plan cable routing
• Verify PSU length fits within 250mm (or 225mm for rear-connect boards)
• Check GPU length/width against the 360mm x 170mm limit
• Confirm CPU cooler height is 160mm or under
• Choose the desired color variant, as colors differ (this listing is Black Cherry)

Questions about compatibility? Ask TechCure India on WhatsApp

Explanation written by TechCure India from the manufacturer's published specifications — it is not a measured test result.

** For complete and latest product details, please also verify once on the manufacturer's official website (official product page). Specifications on the official website are final.