Hyte Y50 RGB MId-Tower Gaming Cabinet - Snow White

Key features

• Panoramic tempered glass side and front panels
• Supports both traditional and rear-connect ATX motherboards
• Pre-installed 360mm reverse-blade RGB side fan and 120mm rear RGB fan
• Nine total fan mounts across top, side, rear and bottom
• Room for full-size 360mm GPUs and thick 83mm radiators on the side panel
• Dedicated drive bays for both 2.5” and 3.5” storage

Understand This Product — TechCureIndia

What it does

A mid-tower steel and tempered-glass PC case that houses and cools desktop components while supporting custom liquid cooling loops and RGB lighting.

What the key specifications mean

• Motherboard Support: Confirms whether your chosen motherboard, including rear-connect designs like Asus BTF or MSI Project Zero, will physically fit.
• Power Supply: Tells you the maximum PSU length the case accepts, which shortens slightly when using a rear-connect motherboard.
• Video Card Max Dimensions: Sets the upper limit on GPU length and width so you can check clearance before buying a graphics card.
• Top/Side/Rear/Bottom Fan & Radiator Support: Shows where you can mount fans or radiators and how thick/long they can be for custom or AIO cooling.
• CPU Cooler Height: Limits the maximum air-cooler height so large tower coolers can be checked for fit.
• Internal Drive Bays: Indicates how many 2.5” and 3.5” drives can be installed, with some bays shared between the two sizes.
• Expansion Slots: Shows how many expansion cards (GPU, capture card, etc.) the case can hold at once.
• Front USB-A/USB-C: Lists the front-panel connectivity speed available for peripherals and fast external drives.

Practical benefits

• Clean front-of-case cabling thanks to corner-mounted I/O
• Flexible build options for both traditional and rear-connect motherboards
• Pre-installed RGB fans reduce initial setup cost and effort
• Large interior supports full custom water-cooling loops

Who it suits

• Gamers wanting an RGB showcase build
• Builders using rear-connect motherboards
• Users running thick radiators or large custom loops
• Creators needing extra expansion slots for capture cards

Compatibility and installation

• Motherboard must be E-ATX, ATX, mATX, ITX, or a supported rear-connect ATX model (Asus BTF, Gigabyte Stealth, MSI Project Zero)
• PSU must be ATX form factor and within the length limit
• GPU must not exceed 360mm length and 170mm width
• CPU cooler must be 160mm tall or shorter
• Case volume of 63.8 L with dimensions 473mm x 288mm x 461mm
• Steel, ABS and tempered glass construction
• Includes one 360mm RGB side fan and one 120mm RGB rear fan pre-installed
• Additional fan mounts available on top, side, rear and bottom for further cooling
• Front panel offers 2x USB-A and 1x USB-C ports plus a combo audio/mic jack

Important limitations

• Side radiator thickness support only applies with fan+radiator combinations up to 83mm
• Rear support limited to a single 120mm fan or radiator
• PSU length reduces to 225mm when using rear-connect motherboards
• Drive bay count is shared between 2.5” and 3.5” positions, not fully independent

Package contents

• Specification verification required.

Buy separately:

• Motherboard, CPU, GPU, RAM, storage drives, and power supply must be purchased separately
• Additional fans or radiators beyond the included units must be bought separately if more cooling is desired

Check before you buy

• Confirm your motherboard form factor or rear-connect compatibility before purchase
• Measure your GPU length and width against the case limit
• Check CPU cooler height against the 160mm limit
• Verify PSU length, especially if using a rear-connect motherboard

Questions about compatibility? Ask TechCure India on WhatsApp

Explanation written by TechCure India from the manufacturer's published specifications — it is not a measured test result.

** For complete and latest product details, please also verify once on the manufacturer's official website (official product page). Specifications on the official website are final.